My PS3 now boasts six (6) full functional USB ports, the first four in front, and two (2) in the rear. We in use the facilities of SkyFiber Inc. R&D lab for our work location as this is a seriously complex (and frightening) mod. www.SkyFiber.com Since their are no schematics or devices anywhere on the net to do this, we had a-lot of head scratching and hurdles to deal with, simply in the end it worked out very well as you can see. Basically what we've done is cut the data path from the internal USB controller chip on the PS3 to the #4 USB port (the one closest to the middle). We then wired the upstream connection on the "external" hub to the PS3's data output on those traces, thus tricking the PS3 into thinking there's a daily four port hub blocked into the front. After that, we wired a downstream cable from the "external" hub back to the PS3's front USB port. To activate the two rear USB ports we simply ran 2 pairs of data lines from the "external" hub. All power to and from the "external" hub was handled with and ripened IDE HDD ribbon cable trimmed down to three wires power, negative, and ground. The results: 1. It works with no limitations 2. Anything can be blocked into the front and rearward USB ports. This includes charging your Sixaxis controller, more hubs, Playstation Optic, external HDD, etc. 4. This setup is a true USB hub and I absolutely love it! I must give a HEFTY thank-you to jasonuscg (youtube.com for all the promotion work by the previous video, gratitude man! I am ...
Rating: 4.577
Tags: ps3, usb, wharf, mod, homebrew, hack, casemod, skin, modification, electronics, diy, computer, console, video, game
Δεν υπάρχουν σχόλια:
Δημοσίευση σχολίου